Call 131546 and get a quote or book a New Home Inspection for Bereen online today.
Jim’s Building Inspections conducts new home inspections (also known as new construction inspections) in Bereen and the surrounding areas. Our expert consultants can assist you with every stage of your build and ensure your new build meets your expectations and the necessary standards.
Our local consultants have extensive experience and hold public liability and professional indemnity insurance—meaning you can have peace of mind when you acquire the services of a Jim’s Building Inspector.
We offer same day service for New Home Inspections in Bereen and provide written reports via email within 24 hours of the inspection being conducted.
New Home Inspection Checklist
There are four key inspection stages which can be carried out for New Home Inspections:
The slab stage or the base stage inspection is essential in the inspection process. Finished concrete is inspected to ensure there is an even and consistent finish. The surface should not be powdery or flakey. Levels are checked to confirm the slab has been installed within allowable deviation in the over level across and room or the entire build. The edge rebate is checked to ensure it is not “honeycombed” and there is no evidence of steel reinforcement protruding as it must have at least 40mm concrete coverage. The vapour barrier must extend past the poured concrete slab with adequate overlap left so that it extends up the side wall of the slab past the final finished ground level once the construction is completed.
Frame stage inspections are conducted providing an independent assessment of the works to confirm they have been completed ready for stage payment. Internal checks and company appointed inspections are supported with a fresh and focussed and our review monitors the frame with respect to the approved construction methods stipulated in Australian Standard 1684.2 and the Engineers design requirements as detailed on the Approved Plans.
The installation of windows and door frames are checked at this stage. Frame positioning in relation to the supporting slab is checked with any overhanging tolerances along with load bearing timbers, lintels and orientation of Jack Studs above openings. Items such as the correct number of timber blocks and their securing method are checked along with all bracing, mechanical fasteners, tie downs and anchors.
At this stage we inspect the roofing that is installed to ensure it is complete and free of defects and damage, all flashings are installed. A visual inspection is carried out to check the installation of Flashings. Brick work is checked for correct installation. All windows and doors are installed with the correct fixings using appropriate blocks and the frame straight, plumb and true.
The installed plaster to the ceilings, wall linings and fitted cornice is checked to ensure it is installed to acceptable standards. Waterproof membrane to showers & wet areas are inspected to ensure they are correctly installed and comply with the requirements of the Building Code.
Handover Inspections require an exhaustive check of the construction. At handover inspection we check that all the work completed “In a proper and workman like manner” ensuring that the workmanship is at an industry standard. The construction of the dwelling needs to reflect the Approved Plans and we check that all components of the building comply with relevant Australian Standards and Building Codes.
Handover or Final stage inspections are also called Practical Completion Inspections (PCI) and Pre Handover Inspections. Handover inspections are generally carried out on new homes when construction of the entire home has been completed and all internal fittings, fixtures and finishes have been installed and applied inside the home compliant with the relevant building plans and specifications.
To arrange a quote or a building inspection for a property in Bereen, call Jim’s Building Inspections on 131546.
Or book your Bereen New Home Inspection service online. Reports can be delivered within 24 hours of inspection.
WHY SUBFLOOR INSPECTIONS ARE IMPORTANTJust as you wouldn’t purchase a vehicle without looking under the bonnet you need to be aware of more than just the attractive exterior and stylish interior of the property you are considering purchasing. What you cannot see on first viewing could ...
Concrete stumps are not immune to decay under extreme conditions.Many elevated properties sit on some type of stump support whether it be timber , steel , masonry or concrete . Whist most people would consider concrete stumps to be maintenance free , this is far from the truth . Recently one of our Building Inspe...
The Case For More Home InspectionsBuilding surveyors are calling on Victoria’s state government to mandate balcony inspections. This follows the tragic balcony collapse in Doncaster East in late 2017. Sadly, two people died and many others were injured, according to The Age. In ...
The first signs that a home could have rotten or sinking stumpsIf you are buying your dream home or investment property, it should be remembered that if the property is showing signs of stump damage, it is important to get a professional building consultant to have a look at your property. A house may appear q...
House Inspections Take TimeOkay, random question: How long would you spend inspecting a house before buying it? In Australia, more than half of homeowners (58%) spend less than an hour inspecting before the big buy, according to research put out by ME bank. Thus, it’s not...
The Politics Of Smoke AlarmsFrom 1993 to 2015, CSIRO conducted tests on smoke alarms but the public is yet to read the findings. This comes at a time when activists want ionised smoke alarms banned due to alleged issues with response times to common fires. In America, the alarm...
Asbestos Imports - A Health ConcernIf you follow the news, you’ll be aware that Chinese companies have been exporting asbestos products to Australia. But did you know that they’re not alone? There’s a long list of countries exporting products with asbestos to Australia. They ...
What does Domestic Building Insurance means to Builder or an Owner Builder in Victoria.Whether you are a homeowner who is using a Builder or an Owner Builder, it is mandatory to get a domestic building insurance. If you undertake domestic building work worth more than $16,000, then you need domestic building insurance. Furthermore,...
EXPLAINED – Owner Builder Warranty Inspections & S137B of the Victoria Building Act 1993You're an owner builder and it is time to sell your home. The last thing you want is for your hard work to be a hindrance to potential purchasers who have reservations about quality or compliance, just because the works weren't part of a major domest...
Three Simple Ways To Fight MouldSome things are out of our control. Others are in our control. Thus, when speaking about mould, there are many things we can do. One: Root causes. Find them. A good place to start: Jim’s Building Inspections. When mould is found by experts it’...