Call 131546 and get a quote or book a New Home Inspection for Port Adelaide online today.
Jim’s Building Inspections conducts new home inspections (also known as new construction inspections) in Port Adelaide and the surrounding areas. Our expert consultants can assist you with every stage of your build and ensure your new build meets your expectations and the necessary standards.
Our local consultants have extensive experience and hold public liability and professional indemnity insurance—meaning you can have peace of mind when you acquire the services of a Jim’s Building Inspector.
We offer same day service for New Home Inspections in Port Adelaide and provide written reports via email within 24 hours of the inspection being conducted.
New Home Inspection Checklist
There are four key inspection stages which can be carried out for New Home Inspections:
The slab stage or the base stage inspection is essential in the inspection process. Finished concrete is inspected to ensure there is an even and consistent finish. The surface should not be powdery or flakey. Levels are checked to confirm the slab has been installed within allowable deviation in the over level across and room or the entire build. The edge rebate is checked to ensure it is not “honeycombed” and there is no evidence of steel reinforcement protruding as it must have at least 40mm concrete coverage. The vapour barrier must extend past the poured concrete slab with adequate overlap left so that it extends up the side wall of the slab past the final finished ground level once the construction is completed.
Frame stage inspections are conducted providing an independent assessment of the works to confirm they have been completed ready for stage payment. Internal checks and company appointed inspections are supported with a fresh and focussed and our review monitors the frame with respect to the approved construction methods stipulated in Australian Standard 1684.2 and the Engineers design requirements as detailed on the Approved Plans.
The installation of windows and door frames are checked at this stage. Frame positioning in relation to the supporting slab is checked with any overhanging tolerances along with load bearing timbers, lintels and orientation of Jack Studs above openings. Items such as the correct number of timber blocks and their securing method are checked along with all bracing, mechanical fasteners, tie downs and anchors.
At this stage we inspect the roofing that is installed to ensure it is complete and free of defects and damage, all flashings are installed. A visual inspection is carried out to check the installation of Flashings. Brick work is checked for correct installation. All windows and doors are installed with the correct fixings using appropriate blocks and the frame straight, plumb and true.
The installed plaster to the ceilings, wall linings and fitted cornice is checked to ensure it is installed to acceptable standards. Waterproof membrane to showers & wet areas are inspected to ensure they are correctly installed and comply with the requirements of the Building Code.
Handover Inspections require an exhaustive check of the construction. At handover inspection we check that all the work completed “In a proper and workman like manner” ensuring that the workmanship is at an industry standard. The construction of the dwelling needs to reflect the Approved Plans and we check that all components of the building comply with relevant Australian Standards and Building Codes.
Handover or Final stage inspections are also called Practical Completion Inspections (PCI) and Pre Handover Inspections. Handover inspections are generally carried out on new homes when construction of the entire home has been completed and all internal fittings, fixtures and finishes have been installed and applied inside the home compliant with the relevant building plans and specifications.
To arrange a quote or a building inspection for a property in Port Adelaide, call Jim’s Building Inspections on 131546.
Or book your Port Adelaide New Home Inspection service online. Reports can be delivered within 24 hours of inspection.
Building Inspection Reports - the ultimate negotiation weaponRising damp and termite damage. Two issues that would normally send shivers down your spine and see potential buyers running for the hills. But what if you could you turn a negative building inspection report, into the ultimate negotiation weapon?...
Asbestos - Not Just About HousingFEATHERS were flying in Red Hill last week when neighbours discovered asbestos sheeting was being removed from a disused chicken shed near their properties. First reported in the Southern Peninsula News (6 November 2018) the story continues: Mo...
What is Caveat Emptor?Increasingly property buyers are aware of their responsibility to discover building defects before sale – this is known as the Latin principle Caveat Emptor or ‘buyer beware’. The full quotation is ‘caveat emptor, qui ignorare no...
Rental Reforms To Hit QueenslandQueensland’s 40-year-old rental laws are under scrutiny. One big potential change: making it easier for tenants to own pets and more pressure to address repairs in a timely manner. Property owners, however, may have more powers in their hands to ch...
No Shortcuts For Property InspectionsThere are no shortcuts for property inspections in the professional world. In fact, the backing of an experienced inspector from Jim’s Building Inspections can save you much grief. A professional is on top of his or her game and working for you....
Two Things You Need To Know About Smoke AlarmsOne: Smoke Alarms Aren’t Always Reliable Smoke alarms aren’t always reliable which is why a professional inspector can make your job easier and life safer. A good inspection takes into account adequate positioning and operational status in orde...
Asbestos In The NewsThink asbestos is old news – and not relevant in today’s society? Think again. Here’s one of many asbestos-related news stories. From the Western Advocate: WORK on Bathurst Tennis Centre’s new $800,000 clubhouse has come to a halt after...
What's involved in a home inspection?Most of the time we never get to meet our clients face to face and only a small handful are ever able to come along to the home inspections we organise. So there is often a bit of mystery around what exactly we do during a home inspection. ...
How Different Methods of Property Sale Impact When You Need a Building InspectionTHE TIMING OF A BUILDING INSPECTION DEPENDS ON YOUR SITUATION AND MOSTLY THE METHOD OF SALE. As the findings of a building inspection report may cause you to withdraw an offer you should always ensure that you are informed of your ri...
What is a Building Inspection?A building inspection is designed to give you independent and objective advice about the physical state of a building, enabling you to make an informed decision, generally about whether or not to buy a building. A building inspection is a snapshot...