Call 131546 and get a quote or book a New Home Inspection for Ashmore Estate online today.
Jim’s Building Inspections conducts new home inspections (also known as new construction inspections) in Ashmore Estate and the surrounding areas. Our expert consultants can assist you with every stage of your build and ensure your new build meets your expectations and the necessary standards.
Our local consultants have extensive experience and hold public liability and professional indemnity insurance—meaning you can have peace of mind when you acquire the services of a Jim’s Building Inspector.
We offer same day service for New Home Inspections in Ashmore Estate and provide written reports via email within 24 hours of the inspection being conducted.
New Home Inspection Checklist
There are four key inspection stages which can be carried out for New Home Inspections:
The slab stage or the base stage inspection is essential in the inspection process. Finished concrete is inspected to ensure there is an even and consistent finish. The surface should not be powdery or flakey. Levels are checked to confirm the slab has been installed within allowable deviation in the over level across and room or the entire build. The edge rebate is checked to ensure it is not “honeycombed” and there is no evidence of steel reinforcement protruding as it must have at least 40mm concrete coverage. The vapour barrier must extend past the poured concrete slab with adequate overlap left so that it extends up the side wall of the slab past the final finished ground level once the construction is completed.
Frame stage inspections are conducted providing an independent assessment of the works to confirm they have been completed ready for stage payment. Internal checks and company appointed inspections are supported with a fresh and focussed and our review monitors the frame with respect to the approved construction methods stipulated in Australian Standard 1684.2 and the Engineers design requirements as detailed on the Approved Plans.
The installation of windows and door frames are checked at this stage. Frame positioning in relation to the supporting slab is checked with any overhanging tolerances along with load bearing timbers, lintels and orientation of Jack Studs above openings. Items such as the correct number of timber blocks and their securing method are checked along with all bracing, mechanical fasteners, tie downs and anchors.
At this stage we inspect the roofing that is installed to ensure it is complete and free of defects and damage, all flashings are installed. A visual inspection is carried out to check the installation of Flashings. Brick work is checked for correct installation. All windows and doors are installed with the correct fixings using appropriate blocks and the frame straight, plumb and true.
The installed plaster to the ceilings, wall linings and fitted cornice is checked to ensure it is installed to acceptable standards. Waterproof membrane to showers & wet areas are inspected to ensure they are correctly installed and comply with the requirements of the Building Code.
Handover Inspections require an exhaustive check of the construction. At handover inspection we check that all the work completed “In a proper and workman like manner” ensuring that the workmanship is at an industry standard. The construction of the dwelling needs to reflect the Approved Plans and we check that all components of the building comply with relevant Australian Standards and Building Codes.
Handover or Final stage inspections are also called Practical Completion Inspections (PCI) and Pre Handover Inspections. Handover inspections are generally carried out on new homes when construction of the entire home has been completed and all internal fittings, fixtures and finishes have been installed and applied inside the home compliant with the relevant building plans and specifications.
To arrange a quote or a building inspection for a property in Ashmore Estate, call Jim’s Building Inspections on 131546.
Or book your Ashmore Estate New Home Inspection service online. Reports can be delivered within 24 hours of inspection.
What is a Building Inspection?A building inspection is designed to give you independent and objective advice about the physical state of a building, enabling you to make an informed decision, generally about whether or not to buy a building. A building inspection is a snapshot...
Asbestos Concerns? Call The ExpertsHere’s an all too familiar story from the Newcastle Herald: A Glendale property is demolished after its owners found deadly loose-fill asbestos insulation. This type of asbestos was relatively popular in the1960s and 1970s. Science now tells ...
Mouldy Issues For LandlordsA growing number of tenants are trying to educate landlords about the many ways in which mould can make us sick. So the ABC’s AM political reporter, Alexandra Beech, took the time to speak to one such person, Caleb Rudd. Mr Rudd is behind a Face...
Three Simple Ways To Fight MouldSome things are out of our control. Others are in our control. Thus, when speaking about mould, there are many things we can do. One: Root causes. Find them. A good place to start: Jim’s Building Inspections. When mould is found by experts it’...
Property Depreciation - Some QuestionsQ: What’s property depreciation all about? A: In a nutshell, depreciation is a tax deduction when your property’s value declines. The result: Less tax, more money in your pocket. Q: Where can I find professional help? A: Jim’s Buildi...
Why arranging a Pre-Sale inspection can give you an advantageIf you’re thinking about listing your home for sale, it is the perfect time to look at anything you may need to fix or repair. You’re probably used to the ceiling water stains and spots of mould in your kitchen cupboards, but these minor defects ...
What's Depreciation?New to the property investment game and struggling with the lingo? You’re not alone. Below is one definition posted by news.com.au to build your real-estate knowledge. What’s depreciation? > Depreciation Often investors can claim a po...
Re-stumping red flagsA guide to Re-Stumping Re-stumping - or re-blocking as it's known in Victoria - is big business in Australia and can be a very costly exercise, particularly if you don't know what you're looking at and you don't understand what you've bought into....
Buying Off-The-Plan Housing Needn't Be ScaryBuying an off-the-plan house needn’t be scary if you make smart choices. One important choice: Seeking out experts in New Construction – and Jim’s Building Inspections is a good place to start. Buying off-the-plan with professional guidan...
Is your house cracking up?Is your house cracking up? A long, spidery vein is inching its way across the dining room wall. It seems to be spreading even as you stare at it! You’re sure it wasn’t there yesterday! So what does this mean and how can it be fixed? Don’t...